High precision elbow processing technology. There is no Angle control accuracy on the original device, just to control accuracy. ±5 degrees, can not consider the accuracy of elbow products. The new type elbow machine uses rotary encoder and program controller to automatically and accurately control the Angle of view of the elbow, and the accuracy of the elbow reaches 1 degree of positive and negative electrodes, fully considering the precision of the elbow product.

The elbow has strong working ability, high quality, large diameter and large wall thickness, and the half warp range of the elbow is 50% higher than that of the original equipment. The larger size of the elbow is &42mmx4mm, and the bending half warp is at least 3 times; The larger specifications of the equipment are up to &63mmx6mm, and the bending is at least twice the half warp. Due to maintenance for automatic cnc pipe end forming machines equipped with anti-wrinkle blocks and self-lubricating equipment of mandrel, the creasing and lateral thinness of the bending cavity are significantly reduced.

Maintain the whole process of elbow automation technology, high production and processing efficiency. When using the original equipment to produce and process the finishing rolled pipe, the whole process of the elbow is according to the manual operation of the staff, the elbow advance and retreat rate is the same, and the work efficiency is not high. The pipe bender is operated by a program controller, which makes the whole process of bending automatic. According to the capacity of the variable speed, the elbow die is stable, fast calibration, further improve the production and processing efficiency, ease the labor efficiency of employees.

High mechanical efficiency, low energy consumption. The oil supply of the original equipment using a single pump is interrupted, which may lead to accidents and automatic control of the speed control valve system working pressure. If the working pressure of the system software is adjusted, it cannot be changed again. maintenance for automatic cnc pipe end forming machines The use of dual-variable pump composition oil supply interruption, may lead to accidents. According to the transformer module, the working pressure of the three-level system software can be maintained, the power is reduced, the overall mechanical efficiency is improved, and the environmental protection and energy saving are 18% compared with the original equipment. In order to bend the water pipe of different specifications, it can only be adjusted according to the large specification model, so when bending the water pipe of small specifications, it will lead to the same luxury waste of electric energy of the Great horse car.

maintenance for automatic cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming